Made by ultra refined stainless steel for high corrosion & wear resistance and gives a suitable low pressure at high line speed machine. This Doctor Blade has high density. It gives more mileage and better print for long running jobs. Due to its both sides well polished round edge, it has no burr coated on this blade. This blade is useful when printing with water based inks having high Ph value.
|Application||Rotogravure & Flexographic printing, Lamination & Coating and Water base ink coating.|
|Materials||High quality carbon steel|
|Tensile Strength||1900 N/ mm|
|Blade Width||10 mm to 100mm|
|Packing||Roll in dispenser box (easy to use)|
|Length||(i) Coils 100 meter or 50 meter ( Other meter as customer requirements)
(ii) Pre- cut length ( No joints in any coil).
|Thickness||(0.10 , 0.15 , 0.20 ) mm|
|Lamella ( Tip) Thickness||NIL|
|ELONGATION||5 to 7 %|
The support Blade must be clean and uniform the and should be mounted on top of the doctor blade as shown above figure . To permit flexibility and proper lubrication , the thickness of the support blade between 0,5 mm .
The Distance between the doctor blade tip and the doctor blade tip should be between 3-5 mm .
Use a high quality doctor blade with dimensions suitable for your ink and anilox type.